Prepare the surface
Clean and degrease the surface and remove loose material before coating. Do not use the spray to cover flaking rust without preparation.
INDUSTRIAL MAINTENANCE SPRAYS
WEICON Zinc Spray Bright Grade 400 ml for Corrosion Protection
A zinc spray coating for protecting metal surfaces, with a bright finish resembling fresh hot-dip galvanizing. Used on welds, drilled areas and galvanized-coating repairs after surface preparation.
400 ml
Product Overview
- Pack
- 400 ml
- Type
- Zinc corrosion-protection coating
- Finish
- Bright, resembling fresh galvanizing
- Application temperature
- +5 to +35°C
When to Choose This Product
Choose it when a prepared area needs a protective metal coating rather than cleaning or temporary lubrication. It can form part of metalwork and galvanized-component maintenance supplies for workshops and factories.
This is a protective coating, not a rust remover or electrical contact cleaner. Spraying a galvanized repair area is not the same as hot-dip galvanizing the entire component.
Selection and Safe Use
Shake and apply evenly
Shake until the mixing ball is clearly audible, then apply evenly in crosswise passes from about 25 cm, following the label.
Allow the coating to dry
Follow the product sheet’s drying and curing times before handling or overcoating; results depend on application conditions.
Follow Safety Instructions
Read the pack label and the product safety data sheet before use. Keep the can away from sunlight, heat and ignition sources; do not pierce or burn it. Use suitable ventilation and personal protection based on the task risk assessment.
Maintenance Supplies for Workshops and Factories
Prepare your request around the task: metal-surface protection, contact cleaning or moving-part lubrication. Specify the product instead of a general description, and include pack size, quantity and delivery location so the offer can match your maintenance team’s needs.
For several chemicals, send a list identifying each product and quantity. Include site handling and storage requirements, and do not select substitutes solely by can colour or a similar name.
Manufacturer Product InformationQuestions Before Ordering
Can it be used on welds and drilled areas?
Yes. Its uses include coating welds, drilled areas and metal surfaces requiring corrosion protection after preparation.
Can I spray it directly over rust?
Prepare the surface and remove loose material and grease. Assess the metal condition; the spray does not replace repair of damaged metal.
How does it differ from a lubricant spray?
Zinc spray is a surface-protection coating, while lubricant sprays are used for moving-part maintenance. Select by the task, not the can appearance.
How do I request a business supply price?
Send the product name, pack size, quantity, delivery city and any task-specific requirements. The quotation confirms availability, lead time and order terms.